HTC HD2 NAND Toolkit v4.2.0.1 – Toolkit for HD2

Please Do Not Modify/Rename/Delete Any Files From The Program Files Directory! Doing So Might Brick Your Device!!!
Hello XDA Users / HD2 Owners,
This is an All in One Toolkit for HTC HD2 NAND Users. The main purpose of this toolkit is to simplify many complex tools/guides which are difficult or unsafe to use. As we all know that HD2 has got a powerful hardware base, but the pre-packed Windows Mobile operating system just ruins all the fun of having a device with high specs. So, developers on XDA like codesmith and Cotulla have created alternative bootloaders which can load Android kernels so that we can use Google’s Android operating system on our devices. This tool will help you install those bootloaders, and also do many other customization/modding works easily from one control panel. Here are the main features of the Toolkit:
Simplifies Installation of cLK and MAGLDR (Android Bootloaders)
Simplifies Installing Roms, Radios, SPL’s and other things by letting you install NBH Files with one click
Makes it easier to Re-Partition your Android Phone
Makes it easier to install Reicvery
Automates process of flashing NBH Files
Well, those were just the main highlights of the tool. There are a lots of other numerous features that will let you easily do many complex stuff. After lots of nights without sleep and red eyes, i have finally made this small piece of software able to do most things that a normal HD2 NAND Android would want to do easily.
Current Version: 4.2.0.1
Current Recovery Version: 5.0.2.6
Last Update: 6/15/2011
Latest HighLights
Installer
Express Mode – Express Mode enables you to automatically do a lots of stuff automatically. Just check the Express Tools button and try to use the features mentioned on the msgbox
NBH File Handler – Easily install nbh files by just opening it like a normal file
About The Software
Hd2 Toolkit is the result of a lots of nights of work with help from recognized developers such as arif-ali, seadersn and others. I have tried my best to make the software as user friendly and powerful as possible. I really appreciate the fact that you guys are using and loving this little software i made. At first, i made a tool that was intended to make it easier to repartition MAGLDR bootloader. Then gradually you guys started using it and started suggesting more and more features which i implemented as soon as i could. Version after version, i started to add new new features you guys suggested and soon i changed the name to ClockworkMod Installer. After few versions of developement, and bug reporting from T-Macgnolia, i finally added support for cLK bootloader. Then after adding a lot more features you guys suggested, i changed the name again, and this time to a name that makes broader sense, HD2 Toolkit. I will keep on updating this tool as frequently as i can. I hope you guys will like this tool. Any suggestions, comments, questions, bug reports or anything related to this tool are welcome. Thanks to mods who made this post a sticky
General Info
1) MAGLDR Repartition – This option will completely erase all your files and data on your device and change the system partition size to the one you choose. Use this option if you get no memory left error or if you need to change partitions to use new rom.
2) MAGLDR Recovery Update – This will update your recovery from older version to newer version in MAGLDR without deleting any data or changing partitions. Use the first option if you get no memory left error. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
3) cLK Recovery Install – This will install/update your recovery from older version to newer version in cLK. Your phone needs to be powered on, connected, usb debugging enabled and in android to use this option.
4) cLK Repartition – This option allows you to re-partition your hd2 running clk bootloader easily like magldr.
5) Downgrade Recovery – This option allows you to downgrade recovery on your hd2 easily. This might be useful if you get an no memory available error while flashing.
MAGLDR Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose the system partition size you want, or choose custom and enter custom size.
5) Press Repartition button.
6) Follow Instructions.
MAGLDR Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose MAGLDR Recovery Update
5) Press Update
5) Follow Instructions.
cLK Partitioning Instructions
1) Download the ZIP file.
2) Extract it somewhere.
3) Open Setup.exe
4) Choose "cLK Reparititioin" and choose system partition size you want.
5) Press Repartition button.
6) Follow Instructions.
cLK Upgrade Instructions
1) Download the ZIP.
2) Extract it somewhere.
4) Choose cLK Recovery Update
5) Press Update
5) Follow Instructions.
Download (4.2.0.1)
http://www.multiupload.com/E3L7F8A0VY
bzdemes for continuing my work!
Koush for Clockworkmod
arif-ali and seadersn for compiling clockworkmod and also for lots of other stuff
T-Macgnolia for doing bug testing and reporting them (Big Thanks!!)
codesmith for cLK
Cotulla and DFT for MAGLDR
Everyone who suggested me features
Everyone else who has helped in developement of HD2

Odin Guide on How to Flash and Install stock ROM Firmware on Samsung Galaxy Y S5360

How to use Odin in flashing the stock ROM on Samsung Galaxy Y S5360?

Here's the procedure on how to manually install the stock ROM (firmware) on Samsung Galaxy Y GT-S5360. Flashing stock ROMs is useful in downgrading or upgrading to any available firmware versions you desired. This has been also useful for unbricking purposes for a bricked, reverting back to original stock or if you needed your device warranty back.

This guide is a bit risky for beginners and can only be used by advance users who already had a little bit experience on how to tweak android devices firmware.
Now, this procedure is no joke and should be taken seriously  for it might results to damage your phone if some mistakes might happen. We are talking about firmware flashing here, one false move or any interruption will take your device into serious situation that is not too easy to recover.Your phone is not a toy for us, but it is your personal property, you are the only one who can decide on what to do about it.

 Disclaimer: We shall not be held not responsible if anything happens to your device by following this guide. Proceed at your own risk!

Needed files and tools
Stock ROM - See list of Samsung Galaxy Y stock ROMs (extract it after downloading)
Odin Multi-downloader -
PIT file - Tottoro.pit (Only needed for full flashing)
Driver - You need to install Kies to get the driver of your phone.
USB cable - use the supplied USB cable of your Galaxy Y.
PC or laptop - running on Windows or later OS.
Your Phone - Samsung Galaxy Y GT-S5360

Preparation before Flashing
Back-up all of your important data stored in the phone like contacts, messages and etc. Flashing will wipe and delete all of it.
Ensure that your phone is fully charge or above 50% charge. (If your phone had an auto-shutdown history, and its too old, use a newer or good working battery.
Remove the SIM card and the external memory card. (not necessarily but recommended to avoid any certain issues)
Hard Reset - We often do hard reset before flashing to clean the memory cache of the phone. Master reset code *2767*3855# .

ODIN Flashing Procedures for Samsung S5360 Galaxy Y
1. Run the ODIN Downloader on your PC desktop.
2. Load the firmware binary files on each designated button spaces.

How to Flash with Multiples files with Pit, Bootloader, PDA, Phone and CSC
This is full flashing and useful for unbricking for it has a full packaged with individual file allocations, this type of files we often used to fix a bricked Samsung Android devices. Some firmware updates have like this one and some are came into just a single file packaged.

Click on each button and load the appropiate file unto it.
Pit Button - the tottoro.pit is the default repartition file for Samsung Galaxy Y S5360

Bootloader - look for the file with the letter Boot,
like DefaultCalDataWithBoot_S5360XXXXX_REV05.tar.md5

PDA button - look for the file with the letters PDA on it,
like PDA_S5360XXXXX_REV05.tar.md5

PHONE button- look with the word MODEM file,
like MODEM_S5360XXXXX_REV05.tar.md5

CSC button - associated also with letters CSC or Multi_CSC,
like GT-S5360-MULTI-CSC-OXXXXX.tar.md5

There are three checkboxes on the left side of ODIN, the Re-Partition, Auto Reboot and F.Reset Time.
The Auto Reboot and F.Reset Time are often always checked in flashing while the Re-Partition will only be checked if you want to fix the memory partition of the phone, now if you'll only want to upgrade or downgrade DO NOT CHECK THE REPARTITION.



How to Flash Without Bootloader and PIT file?
Flashing with pit and bootloader file is quite enough risky but a little more safer than without it.
It's the same as the above method just load the PDA, MODEM/phone and CSC file to each designated boxes. The "Repartition" checkbox is not to be check, only the Auto-Reboot and F,Reset Time got the checks



How to Flash with Only Single file?
Some files came only in a single packed like with tar.md5 file extension., and sometimes a 'SS_DL.dll' file also included on it. Others are confused where to put this file. Well, the S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 goes on to the PDA button section while the 'DLL' file in not to be used, it only be used on some other issues.
Again the "Repartition" check-box is not to be tick, only the Auto-Reboot and F.Reset Time are checked.



Setting up the Samsung Galaxy Y into Download Mode and Connecting to PC.
You need to set the device into download mode in order to let Odin recognize it. To set into download mode
Turn OFF the phone, then hold and press the three buttons Volume Down + Home + Power Key simultaneously, you are then opted into download mode screen use the Volume Up button to proceed. If you'll still not get into download mode, remove the battery a couple of seconds then put it back again and then press the download mode button combination again.



Once the phone displays the Android robot and says "Downloading..." Connect the phone to PC with the supplied USB cable. Odin will automatically recognize it if it's properly connected, the ID:COM mapping will highlight to color yellow and says "added" on the log box.

Start Flashing
Hit the "Start" Button when all are set perfectly to begin flashing.


CAUTION: Avoid touching the phone while the flashing already started, any interruption will result into serious issues like soft-brick or hard-brick.

Let the flashing completes, a progress bar displays until the firmware downloading process finishes. It only takes around 3 to 5 minutes, depends of your PC speed.
When a word "PASS" appears, it means that the flashing is successful. The phone will then reboot and after completely rebooted it is now safe to remove it from computer's connection.


Do a hard reset again by the code *2767*3855#  or in recovery mode hold and press Volume UP+Home+Power key. Navigate to the Wipe Data cache/Factory Reset.
Some other tweaks:
1) To check your  recent firmware info *#1234#
2) CSC configuration - IMEI number check [*#06#]
3) *#272*[IMEInumber]#
4) Choose sales code

T-Mobile Samsung Galaxy Tab 7.0 Plus Android 2.3.6 Gingerbread T869UVKL2 Firmware Update Released

The firmware update for T-Mobile's Samsung Galaxy Tab 7.0 Plus has been officially pushed out by Samsung  Over KIES and FOTA (over the air). This is for the tablet's performance improvements and enhancements and no other major changes or some added features on this update. The firmware build number is T869UVKL2 packed in Android 2.3.6 Gingerbread - an update from previous build T869UVKJD.

For those who does not have an update yet and wants to upgrade now, just check it out on Kies or just wait for the automated over the air update through SMS message notification from T-Mobile.

Firmware info:
Baseband/Modem build number: T869UVKL2
Model: Samsung Galaxy Tab 7.0 Plus SGH-T689
Provider/Country: T-Mobile USA
Product Code: SGH-T869MABTMB
PDA: T869UVKL2
CSC: T869TMBKL2
Phone/Modem: T869UVKL2Version: Android 2.3.6 Gingerbread
Build/Release: December 13, 2011

Just visit this official support page of Samsung on how to update your Samsung Galaxy Tab 7.0 Plus SGH-T689 using Kies and or via FOTA (Firmware Over The Air). The T869UVKL2 stock ROM is also available for advance users, you can grab it here at sammobile firmware page. Stock ROM: SGH-T869_TMB_T869UVKL2_T869TMBKL2

Samsung Poseidon's ROM GB.XXKPQ for Samsung Galaxy GT I9003

This is the best custom ROM for GT I9003 I have used so far

POSEIDON'S ROM RC1 XXKPQ
All credits go to BlaqKarma
blaqkarma CREATOR OF POSEIDON'S ROM for SGSL i9003
I have included all the required files with required instructions.

SYSTEM MODS
-ROOTED
-BUSYBOX INSTALLED
-DEODEXED
-ZIPALLIGNED
-EXT4 CONVERT

THEME
-TW4 LAUNCHER
-MIXED THEME
-FLYIN TRANSITION
-1% BATTERY INCREMENTS
-EXTENDED POWER MENU
-CRT EFFECT
-14TOOGLE
-10LOCKSCREEN
-CUSTOM SOUNDS/RINGTONES/NOTIFICATIONS
-MULTI-LANGUAGE ANDROID KEYBOARD
-THEMED SWYPE
-WORKING EDT TWEAK
(now u can change your status bar color,hide status bar clock/battery, etc etc..)
(LOCKSCREEN OPTION DISABLED as you can change it on the DISPLAY OPTION)
-CUSTOMIZE YOUR BOOT ANIMATION

ADDED FEATURES
-ENHANCED RAM MANAGEMENT
-ENHANCED REBOOT TIME
-ENHANCED UI RESPONSE
-DECREASED BATTERY DRAIN
-CYANOGEN APN LIST
-GPS FIX
-TUN.KO FOR OPENVPN

UNIQUE FEATURES
-ENHANCED VIDEO AND PHOTO RECORDING QUALITY
-DECREASE DIALLING OUT DELAY
-INCREASED OVERALL TOUCH RESPONSE
-INCREASED 3G SIGNAL
-INCREASED INTERNET CONNECTION
-RENDER UI on GPU

ADDED TWEAKS
-LOOPY script by LPY
-V6 SUPERCHARGER by ZEPPELINROX
-ALLINONE script by FUSS132
SAY THANKS TO THEM ON THEIR ORIGINAL POST

ADDED APPS
-MIUI MUSIC PLAYER
-BOB CLOCK3D
-POLARIS OFFICE
-FASTER FIX
-DSP MANAGER
-ANTEK APP MANAGER

I have included all required instructions. Please open Readme folder first:nod:
Screenshots






Download Here

Droid Razr 'SIM Card Error' Plus Camera BugFix Software Update Rolled Out

A little big relief for all Verizon wireless Droid Razr users who's suffering the sim card issues - received a red X in the notification bar saying: “SIM card authorization error” and “The SIM Card may not be authorized for LTE service. Please Power down the phone and contact Wireless Provider Customer Service.” Upon receiving this message they no longer are connected to Verizon’s 4G LTE network.

Finally, Verizon tech support team after having heavy stormed by confused Droid Razr users already found out an answer to resolved the said SIM card error outage problem. The software update that fix this bug will be push out any time now.

The new software build is 6.11.747.XT912.Verizon.en.US

Feature List:

* SIM error notification has been fixed
* Improved camera features and quality
* Improved stability of menu access, browser, phone dialer, video playback and music player to prevent force-close errors and lockups
   
* Updated group message notification in e-mail
* Improvement in 3G/4G data connectivity
* Maintain network connection upon completion of a voiec call
* Background color has been adjusted to improve readability in Lapdock connection UI menu items.

Via Verizon Wireless Thanks to Android central

S5830XWKT7 Samsung GalaxS5830XWKT7 Samsung Galaxy Ace Android 2.3.6 Nordic Countries Firmware Updatesy Ace Android 2.3.6 Nordic Countries Firmware Updates

The firmware build number S5830XWKT7 has just been spotted on Kies for Samsung Galaxy Ace GT-S5830. The indicated CSC file is 'NEE'  for Nordic Countries - Denmark, Finland, Iceland, Norway and Sweden. The pack is Android 2.3.6 Gingerbread, an update from the previous build S5830XWKC2.
Anyone from Northern Europe  can now check for updates through Samsung Kies Official firmware update server.

Firmware info:
Build: S5830XWKT7 - NEE
Model:  Samsung Galaxy Ace GT-S5830
Product Code: GT-S5830OKANEE
PDA: S5830XWKT7
Phone: S5830XWKT3
CSC: S5830OXFKT1
Version: Android 2.3.6 Gingerbread
Build/Modified: December 09,2011

The Stock ROM Odin flashable version has already been already pulled from Kies server,  advance users can now upgrade to Android 2.3.6 by flashing the said stock ROM using Odin downloader tool.

Download the S5830XWKT7 Stock ROM:
GT-S5830_NEE_S5830XWKT7_S5830XWKT3_S5830OXFKT1
 Password: sampro.pl
Credits to Przekret @XDA

How to Flash Samsung Galaxy TAB P1010 WIFI Firmware using ODIN

Here's a step by step procedure on how to flash the Samsung Galaxy TAB P1010 WIFI device.

Warning: This is not advisable to beginners who doesn't have any knowledge about firmware version. TABS firmware comes from different versions according to Country, Region and Carrier providers.  You will messed up your phone if you will flash it with a wrong firmware which is not comes or match to your device.
You are warned, proceed at your own risk! this is for advance users only. We are not liable any problems happens to your device.

Before you proceed prepare the necessary things to do as follows:
- Create a sync to backup all your personal data, like: Contacts, Messages, Applications, Pictures and Videos, because you will lose after the update.
- Make sure that the battery as its peak level to ensure stability and avoid failure issues.
-Close all softwares, such as KIES suite, Antivirus, firewalls, to prevent the possible conflicts;

-Prepare a personal computer or laptop with Windows XP, Windows Vista or Windows 7, and of course you must to deactivate the antivirus from your computer and you must to have administrator access, to be able to download and install the drivers ;

Prepare the tools you need in this process.:
 Samsung Galaxy Tab Downloader program

Samsung P1010 Galaxy Tab WIFI Original Firmwares

P1010XWKB5 - P1010XWKB6 - P1010XWKC1-OXX - P1010XWKB8
 Or Download the latest firmware updates

- Samsung Galaxy Tab WiFi P1010 USB cable;

Flashing the Samsung Galaxy TAB P1010 Firmware Procedures:

1. Extract and Run the ODIN Downloader tool.

2. Check the AUTO REBOOT and RESET TIME checkbox.

3. Select the PIT/PDA/CSC files in Odin
Insert the desired files on each field.

1. Click PIT button and select: p1wifi_20110128_r10_00.pit
2. Click PDA button and select: P1010xxxxx-REV03-ALL-low-CL946441.tar.md5
3. Click CSC button and select: GT-P1010-MULTI-CSC-Oxxxxx.tar.md5

4. Set the device into DOWNLOAD MODE
Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power at the same time.You will eventually see a picture like the one below with black Android robot digging within a  triangle.

5. Connect the Device to PC using the DATA cable
Connect your phone with your computer and wait until the drivers are installed.
Make sure the ID:COM box highlighted yellow to know that the handset is connected to the PC properly.
If you still do not get any results, try another USB port on your computer.

6. Enter the Device into Firmware Downloading process
 When the drivers are installed and all binary files needed is ready, Click Start Button. Finally you must to wait until the Samsung Galaxy Tab WiFi P1010 update process is complete (you will receive after 3-5 minutes a green Pass box)..

The phone will be flashed and once it’s finished, it will boot up.Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!
But if you do not see a blue progress bar on your phone after 5 minute, take out your phones battery, unplug your phone and start from step 1 again.

7. Handset reboots when flash or download completes
Once you see the message "PASS", you have successfully flashed the phone.

To check if you have successfully update your device enter the following code: *#1234#.
Also, you may know that you can clear your cache, simply using the following full reset code: *2767*3855#.